ncep_post.fd Directory Reference

Files
file	AllGETHERV_GSD.f [code]
file	ALLOCATE_ALL.f [code]
file	ASSIGNNEMSIOVAR.f [code]
file	AVIATION.f [code]
	Subroutines related to aviation.
file	blockIO.c [code]
file	BNDLYR.f [code]
	Subroutine that computes boundary layer fields.
file	BOUND.f [code]
	bound() clips data in passed array.
file	CALDRG.f [code]
	Subroutine that computes drag cofficient.
file	CALDWP.f [code]
	Subroutine related to dewpoint temperature.
file	CALGUST.f [code]
	Subroutine that computes max wind level.
file	CALHEL.f [code]
	Subroutine that computes storm relative helicity.
file	CALHEL2.f [code]
	Subroutine that computes storm relative helicity.
file	CALHEL3.f [code]
	Subroutine that computes storm relative helicity.
file	CALLCL.f [code]
	Subroutine that computes LCL heights and pressure.
file	CALMCVG.f [code]
	Subroutine that computes moisture convergence.
file	CALMICT.f [code]
	Subroutine that computes hydrometeors.
file	CALPBL.f [code]
	Subroutine that computes PBL height based on bulk RCH number.
file	CALPBLREGIME.f [code]
	Subroutine that computes PBL height based on bulk RCH number.
file	CALPOT.f [code]
	Subroutine that computes potential temperature.
file	CALPW.f [code]
	Subroutine that computes precipitable water.
file	CALRAD_WCLOUD_newcrtm.f [code]
	Subroutine that computes model derived brightness temperature.
file	CALRCH.f [code]
	Subroutine that computes GRD RCH number.
file	CALSTRM.f [code]
	Subroutine that computes geo streamfunction.
file	CALTAU.f [code]
	Subroutine that computes U and V wind stresses.
file	CALTHTE.f [code]
	Subroutine that computes Theta-E.
file	CALUPDHEL.f [code]
	Subroutine that computes the updraft helicity.
file	CALVESSEL.f [code]
file	CALVIS.f [code]
file	CALVIS_GSD.f [code]
file	CALVOR.f [code]
	Subroutine that computes absolute vorticity.
file	CALWXT.f [code]
file	CALWXT_BOURG.f [code]
	Subroutine that calculate precipitation type (Bourgouin).
file	CALWXT_DOMINANT.f [code]
file	CALWXT_EXPLICIT.f [code]
file	CALWXT_RAMER.f [code]
file	CALWXT_REVISED.f [code]
file	CANRES.f [code]
file	CLDFRAC_ZHAO.f [code]
file	CLDRAD.f [code]
	Subroutine that post SNDING/CLOUD/RADTN fields.
file	CLMAX.f [code]
file	CMASSI.f [code]
file	COLLECT.f [code]
	Subroutine that collect gathers from all MPI tasks.
file	COLLECT_LOC.f [code]
	Subroutine that collect gathers from all MPI tasks.
file	CTLBLK.f [code]
file	cuparm.f [code]
file	DEALLOCATE.f [code]
	MPI_FIRST set up message passing info.
file	DEWPOINT.f [code]
	Subroutine that computes dewpoints from vapor pressure.
file	ETAMP_Q2F.f [code]
file	ETCALC.f [code]
file	EXCH.f [code]
	Subroutines that exchange one halo row.
file	EXCH2.f [code]
file	FDLVL.f [code]
	Subroutine that computes T, Q, U, V on the flight levels (FD).
file	FGAMMA.f [code]
file	FILL_PSETFLD.f [code]
	fill_psetfld() reads post xml control file.
file	FIXED.f [code]
file	FRZLVL.f [code]
	Subroutine that computes FRZING LVL, Z and RH.
file	FRZLVL2.f [code]
	Subroutine that computes FRZING LVL, Z and RH.
file	GEO_ZENITH_ANGLE.f [code]
file	GET_BITS.f [code]
	get_bits() computes number of bits and round field.
file	get_postfilename.f [code]
file	GETGBANDSCATTER.f [code]
file	getIVariableN.f [code]
file	getlvls.f [code]
file	GETNEMSNDSCATTER.f [code]
file	getVariable.f [code]
file	GFIP3.f [code]
file	GFSPOST.F [code]
	pvetc() computes potential vorticity, etc.
file	GFSPOSTSIG.F [code]
	rtsig() reads and transforms sigma file.
file	GPVS.f [code]
	gpvs() computes saturation vapor pressure table.
file	grib2_module.f [code]
file	GRIDSPEC.f [code]
file	gtg_algo.F90 [code]
file	gtg_compute.F90 [code]
file	gtg_config.F90 [code]
file	gtg_ctlblk.F90 [code]
file	gtg_filter.F90 [code]
file	gtg_indices.F90 [code]
file	gtg_smoothseams.F90 [code]
file	ICAOHEIGHT.f [code]
file	INITPOST.F [code]
	initpost() initializes post for run.
file	INITPOST_GFS_NEMS_MPIIO.f [code]
	initpost_gfs_nems_mpiio() initializes post for run.
file	INITPOST_NEMS.f [code]
	initpost_nems() initializes post for run.
file	INITPOST_NETCDF.f [code]
	initpost_netcdf() initializes post for run.
file	intio_tags.f [code]
file	intio_tags.h [code]
file	io_int_stubs.f [code]
file	kinds_mod.F [code]
	This module is to hold specification kinds for variable declaration.
file	LFMFLD.f [code]
	lfmfld() computes layer mean LFM fields.
file	LFMFLD_GFS.f [code]
	lfmfld_gfs() computes layer mean LFM fields.
file	LOOKUP.f [code]
file	machine.f [code]
file	map_routines.F90 [code]
file	MAPSSLP.f [code]
file	MASKS_mod.f [code]
file	MDL2AGL.f [code]
file	MDL2P.f [code]
	mdl2p() computes vert intrp of model lvls to pressure.
file	MDL2SIGMA.f [code]
file	MDL2SIGMA2.f [code]
file	MDL2STD_P.f [code]
	mdl2std_p() vert intrp of model lvls to standard atmospheric pressure.
file	MDL2THANDPV.f [code]
	mdl2thandpv() vert intrp of model lvls to isentropic and PV.
file	MDLFLD.f [code]
file	MICROINIT.F [code]
file	MISCLN.f [code]
file	MIXLEN.f [code]
file	MPI_FIRST.f [code]
file	MPI_LAST.f [code]
file	MSFPS.f [code]
	msfps() computes the map scale factor for a polar stereographic grid at a give latitude.
file	native_endianness.f [code]
	This module, native_endianness, was written by Dusan Jovic and has been adapted to GSI for internal translation of WRF ARW and NMM binary restart files as required to match the machine native endian storage format.
file	NGMFLD.f [code]
	ngmfld() computes layer mean NGM fields
file	NGMSLP.f [code]
file	OTLFT.f [code]
	otlft() computes lifted index.
file	OTLIFT.f [code]
	otlift() computes SFC to 500mb lifted index.
file	PARA_RANGE.f [code]
	para_range() sets up decomposition values.
file	PARAMR.f [code]
file	params.F [code]
file	physcons.f [code]
file	PMICRPH.f [code]
file	POLEAVG.f [code]
file	PROCESS.f [code]
	process() is a driver for major post routines.
file	READ_xml.f [code]
file	retrieve_index.f [code]
	retrieve_index() gets record number of desired variable.
file	RHGRD.f [code]
file	RQSTFLD.f [code]
file	SCLFLD.f [code]
	sclfld() scale array element by constant.
file	SELECT_CHANNELS.f [code]
	select_channels() verifies channel information.
file	SERVER.f [code]
file	SET_LVLSXML.f [code]
file	SET_OUTFLDS.f [code]
	@ brief set_outflds() reads post xml control file.
file	SETUP_SERVERS.f [code]
	setup_servers() setups I/O servers.
file	SLP_new.f [code]
file	SLP_NMM.f [code]
file	SMOOTH.f [code]
	smooth() smooths a meteorological field using Shapiro smoother.
file	SNFRAC.f [code]
file	SNFRAC_GFS.f [code]
file	SOIL_mod.f [code]
file	SPLINE.f [code]
file	SURFCE.f [code]
file	svptbl.f [code]
file	TABLE.f [code]
file	TABLEQ.f [code]
file	TRPAUS.f [code]
	trpaus() computes tropopause data.
file	TRPAUS_NAM.f [code]
	trpaus() computes tropopause data.
file	TTBLEX.f [code]
file	UPP_MATH.f [code]
	upp_math is a collection of UPP subroutines for numerical math functions calculation.
file	UPP_PHYSICS.f [code]
	upp_physics is a collection of UPP subroutines for physics variables calculation.
file	VRBLS2D_mod.f [code]
file	VRBLS3D_mod.f [code]
file	VRBLS4D_mod.f [code]
file	WETBULB.f [code]
file	WETFRZLVL.f [code]
	wetfrzlvl() computes level of 0 wet bulb.
file	wrf_io_flags.f [code]
file	wrf_io_flags.h [code]
file	WRF_STUBS.f [code]
file	WRFPOST.f [code]
	wrfpost() drives the external wrf post processor.
file	xml_perl_data.f [code]
file	ZENSUN.f [code]
	zensun() makes sun zenith and sun azimuth angle.